|
The Hotspot IR Heater is the final outcome of the designers at Hotspot making the decision to re-enter the free-standing heater market in 2010 - and we're very happy that they did !! This robust heater has a curved mounting pole, which is adjustable up to 2.65m, meaning complete control of where the heat goes and the warmth it creates for the people below. The heater head itself continues the robustness theme, being a commercial grade, ceramic-backed unit with safety-glass frontage. The output of the head is 1.5kw, creating a heat area that extends 10 feet. Finally, we have a free-standing electric patio heater that creates harmony between aesthetics and performance
TWO VERSIONS (1) powder-coated black (2) stainless steel
TELESCOPIC MOUNTING POLE use the three-piece mounting pole to extend the heater up to 265cm in height. Take total control of the heat intensity and collapse the heater for easier storage
MOBILITY WHEELS simply tilt the heater back on its integral wheels to relocate it
COMPLETE WITH HEATER-HEAD COVER complete with weather-proof cover to protect the head
ACCIDENT SENSOR in the unlikely event that the heater falls over during use, the integral tilt-sensor in the heater head will cut the power
BUILT TO LAST each version of the heater is fitted with a corrosion resistant, powder-coated steel head, with the black heater undergoing the same thermo-set powder coating process for its mounting pole. The stainless steel version uses 304 stainless steel for its mounting pole, for optimum corrosion resistance
INFRARED HEAT infrared is the most effective and efficient form of radiant heat. It does not blow away in the wind (as with most gas patio heaters) and heats only people, not the air in between
ECONOMICAL costs less than 20 pence per hour to run based on electricity costs of 12p/Kw hour
INSTANT HEAT, NO WARM UP TIME as soon as the heater is switched on the heat is immediately effective, unlike with gas patio heaters which require a warming up period
TECHNICAL SPECIFICATIONS power = 230V ac; fuse = 13A; cable length = 10ft from base (3m); installation advice = wire through a circuit breaker; net weight = 25kg; safety approval = etl approved; device power rating = 1.5kw; nature of heat area = 3.2m (from heater) x 5.8m (across); bulb type = 1.5kw philips 5000 hour
| 
