Conventional Wall-Mounted Patio Heaters

These Conventional Wall-Mounted Patio Heaters are the traditional solution for the domestic and commercial market. The V1 and V2 are differentiated primarily through their IP rating. The V1 must be installed under complete shelter, whereas the V2 is constructed for permanent outdoor use. Both heaters operate between 1.3 and 1.5kw for a 9m/sq heat area

VERSIONS AVAILABLE

V1 - a 1.5kw appliance generating red infra-red light. It is rated for use indoors and outdoors. When used outdoors it must be in complete and unequivocal shelter

V2 - a 1.3kw appliance generating gold infra-red light. It is rated for use indoors and outdoors with an IP23 status that allows permanent exposure to the outdoor environment

COLOURS AVAILABLE v1 is available in white only. The v2 is available in black or white

COMMERCIAL GRADE both versions are designed for prolonged running times, effectively heating an area of 9m/sq

QUALITY CONSTRUCTION both heaters incorporate side-reflectors, integral heat sinks and safety guards. The V1 has a sheet steel construction for sheltered use, the V2 has a cast aluminium body, facilitating comprehensive outdoor operation

INFRARED HEAT infrared is the most effective and efficient form of radiant heat. It does not blow away in the wind (as with most gas patio heaters) and heats only people, not the air in between

LIGHT, NOT JUST HEAT designed specifically to double as a light, emitting an ambient red glow (v1) or gold light (v2)

ECONOMICAL costs less than 19 pence per hour to run based on electricity costs of 12p/Kw hour

INSTANT HEAT, NO WARM UP TIME as soon as the heater is switched on the heat is immediately effective, unlike with gas patio heaters which require a warming up period

ACCESORIES FOR THIS PRODUCT

REPLACEMENT BULBS (SOLD IN PAIRS) - the v1 heater uses 34.7cm R7 bulbs in red or gold light. The v1 is supplied with a red bulb, but can easily be converted to gold light through purchase of the relevant bulb. The v2 heater uses 25.4cm R7 bulbs in red or gold light. It comes complete with a gold bulb, but as with the V1 you decide what colour to replace the bulb with when the time comes. The important thing to remember about gold and red bulbs is that gold bulbs have a 5000 hour life; red bulbs have a 1000 hour life

TECHNICAL SPECIFICATIONS power = 230V ac; fuse = 13A; cable length = 5 metres; installation advice = professional installation only, hard-wired through a circuit breaker; installation height = 2.5m minimum; nature of heat area = 3m (from wall) x 3m (across)