G-Tech Fountain Pumps

G-Tech Fountain Pumps are designed for reliability and durability. The extensive range offers differing outputs for the smallest to the largest of water feature projects. With a G-tech pump you can be sure you have one of the best fountain pumps on the market

FOUNTAIN JET KIT INCLUDED all pumps come complete with one of the following fountain kits:

Kit one: consisting of 1 bell fountain, 1 standard shower head, 1 telescopic fountain tube (30 - 40cm) with side hose nozzle

Kit two: consisting of 1 bell fountain, 1 standard shower head, 1 telescopic fountain tube (35 - 45cm) with multi-gauge side hose nozzle

Kit three: consisting of 1 bell fountain, 1 standard shower head, 1 straight shooter attachment, 1 telescopic fountain tube (45 - 55cm) with multi-gauge side hose nozzle

HOSE NOZZLE all G-tech jet kits have an integrated hose nozzle. This allows the fountain to be used as a cascade pump as well

FLOW ADJUSTOR all G-tech pumps have a flow adjustor. This allows you to change the height of the fountain to suit the demands of your water feature

10 METRES OF CABLE all pumps have 10 metres of cable

VERSIONS AVAILABLE AND ASSOCIATED METRICS/FOUNTAIN KIT

750 LPH - head = 1.6m, fountain height = 0.8m, fountain kit = 1

1000 LPH - head = 1.9m, fountain height = 0.95m, fountain kit = 2

1500 LPH - head = 2.5m, fountain height = 1.25m, fountain kit = 2

2000 LPH - head = 3.2m, fountain height = 1.6m, fountain kit = 3

3000 LPH - head = 3.7m, fountain height = 1.85m, fountain kit = 3

4500 LPH - head = 4.1m, fountain height = 1.9m, fountain kit = 3

6000 LPH - head = 5.5m, fountain height = 2.2m, fountain kit = 3

8000 LPH - head = 6.0m, fountain height = 2.6m, fountain kit = 3

10,000 LPH - head = 5.6m, fountain height = 3.0m, fountain kit = 3

12,000 LPH - head = 7.0m, fountain height = 3.7m, fountain kit = 3

Definitions And Advice

LPH volume of water pumped per hour when using just the fountain kit (litres per hour)

HEAD the maximum height the pump can take water before stalling. Head needs to be considered when running a hose to a cascade. LPH diminishes the higher the head

FOUNTAIN HEIGHT the maximum fountain height acheived using the fountain attachments supplied

MAKING YOUR SELECTION If you are buying a pump purely to run the fountain, then simply select the version with your preferred maximum fountain height. It is sometimes advisable to buy a pump one version higher than your preference, to allow margin for error. If the fountain height is too high you can always bring it down with the flow adjustor. If you are buying the pump to run a hose to a cascade, select the pump with a head two versions higher than the height of your water feature from the pond/reservoir. EXAMPLE: the height of a cascade above a pond is 1.8 metres. The suitable pump is therefore version 2000