Loading... Please wait...

Our Newsletter

Landscapers Natural Gas Fire Pit Burner Kit

  • Image 1
  • Image 2
  • Image 3
  • Image 4
  • Image 5
  • Image 6
  • Image 7
  • Image 8
  • Image 9
  • Image 10
Please Allow 5 Days For Delivery
Free Shipping
Burner Shape:
Bookmark and Share

Product Description

Landscapers Natural Gas Fire Pit Burner Kit

The Landscapers Natural Gas Fire Pit Burner Kit is a specialist kit for hard landscaping a gas fire pit structure in to your garden which runs off the mains gas supply. Made in Britain from high grade stainless steel, the kit is fully CE approved with flame failure pilot assembly. The heat output of the burner is quite something, ranging up to 18kw should you be looking to show your guests something spectacular

WHAT DOES THE KIT INCLUDE? (1) stainless steel burner attached to mounting plate with integral pilot assembly (2) flexible gas tubes running from the burner assembly to the control box (3) control box incorporating gas flow lever and piezo electronic ignition

3 DIFFERENT BURNER SHAPES choose between the following burner shapes to suit your installation (1) Round (2) Square (3) Octagonal. Each burner shape is 60cm in width

UK MANUFACTURED FROM HIGH GRADE STAINLESS STEEL made in the UK from high grade 316 stainless steel, the burner represents an unsurpassable quality standard. 316 stainless steal is the highest grade of stainless steel available, providing complete corrosion resistance

LAVA ROCK INCLUDED lava rock is included to cover the burner

CE SAFETY APPROVED fitted with a flame failure cut-off assembly, and fully CE certified for the UK market, this product provides the required safety assurances for an appliance of this nature

INSTALLATION PRINCIPLE a bricks and mortar structure (or equivalent non-combustible materials) is built under and around the burner outline (see illustrations) with a void left beneath it to allow air to circulate below. In most cases a closed structure is created, requiring ventilation holes (or air bricks) at ground level within the base to allow air to enter from underneath the burner and feed it with the necessary air for combustion. These holes also allow water to escape. Each kit is designed to centrally fit the fire pit in to a structure that has a maximum diameter, or square dimensions of 2.5 metres

GAS SET-UP the fire pit must be connected to the mains by a gas safety engineer. This will involve running an underground gas pipe (not supplied) from under the burner control box, back to a connection inside the house, preferably near the main meter. We deem it essential for an isolator valve to be installed inside the house to prevent use by unauthorised persons or children

DIMENSIONS each burner plate style has a 60cm width (see illustration)

GAS HOSE IS NOT INCLUDED gas hose is not included with the natural gas burner, as it is the responsibility of your gas engineer to select the correct pipe constitution according to your particular circumstances

SOME IDEAS FOR YOUR IMAGINATION some of our previous customers have let us know about their installations. Here are some examples (1) a paving slab construction to match in with the patio floor (2) a large oblong brick structure with 2 square burners running parallel (very impressive!!!) (3) a granite kitchen work top with white rendered sides (4) a masonry structure with its own chimney. The possibilities are endless !!

TECHNICAL SPECIFICATIONS gas = g20 methane; appliance category = 12h; supply pressure = 20mbr; heat input = 11.5 - 18kw; max flow rate = 1.7m3/hr

Warranty Information

12 Months Manufacturer

Find Similar Products by Category

Write your own product review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

Add to Wish List

Click the button below to add the Landscapers Natural Gas Fire Pit Burner Kit to your wish list.

You Recently Viewed...